Let Our Experience Be Your Teacher
Our extensive research and experience in turbomachinery makes us a valuable resource for many of our clients. Our instructors are highly trained and our training manuals easy to understand.
Controlling turbomachinery demands the understanding of three complex disciplines: rotating equipment, process concerns, and controls.
There is much to know, and advancements occur daily. These courses can help!
Course Schedule
Date |
City/ Country |
Location |
Course |
Contact |
Apr 13 - 15 |
Kuala Lumpur, Malaysia |
|
1 |
|
Apr 13 - 15 |
Kuala Lumpur, Malaysia |
|
2 |
|
May 26 - 28 |
Sicily, Italy |
|
1 |
|
Aug 17 - 19 |
Rio de Janeiro, Brazil |
TBD |
3 |
|
Sept 14 - 16 |
Middlesex, United Kingdom |
|
1 |
|
Sept 14 - 16 |
Middlesex, United Kingdom |
|
2 |
|
Nov
16 - 18 |
Amsterdam, The Netherlands |
Mercure Hotel, Amsterdam aan de Amstel |
1 |
|
Nov
16 - 18 |
Amsterdam, The Netherlands |
Mercure Hotel, Amsterdam aan de Amstel |
2 |
|
Courses open for registration
|
Courses conducted
|
Fees for CCC 2010 Short Courses depend on location. Early Bird Registration, 30 or more days in advance, 15% discount. Multiple attendees from the same company attending any CCC short course, worldwide, in 2010 can receive an extra 10% discount.
TBD - Location to be determined later
 To register on-line (e-mail) - please fill out the Course Registration Form and e-mail it to the appropriate contact person.
 To register in written (fax/mail) - please print the Course Registration Form, fill out and fax/mail it to the appropriate address below.
Barbara Borghi
V. le Brianza 20,
20092, Cinisello Balsamo,
Milan, Italy
F: +39-02-618-02330 |
|
fill & email |
print-fill-fax |
|
fill & emai |
|
print-fill-fax |
|
|
|
|
|
|
|
Tania Acioly
Rio de Janeiro
Brazil
T
: +55-21-3535-9295 |
fill & email |
print-fill-fax |
fill & email |
print-fill-fax |
|
|
|
|
Learn by Doing
Our courses are designed to prepare you for the majority of turbomachinery and process control challenges you may face. On-site training is also available to your company and can be sheduled around your plant shifts as needed (please check this page). Or, if you prefer, come to CCC's headquarters in Des Moines, Iowa, U.S.A. for training. We'd be happy to arrange your visit.
Attention: A person cannot attend BOTH courses at the same location because they are held simultaneously!
Not all courses are offered in all locations.
Short Course 1
 Who Should Attend
This 3-day course deals with many aspects related to the operation and control of turbomachinery trains in critical process applications. The course content will be interesting from multiple engineering points of view including Machinery, Process Control, Instrumentation, and Plant Operations perspectives. Sections are included for centrifugal & axial compressors, steam turbines, and gas turbines operations and control techniques. Topics are practical in nature covering antisurge control, compressor loadsharing techniques, steam turbine speed control, gas turbine fuel control, surge detection, and over-speed protection. Design considerations for field instrumentation, valve sizing, and optimized piping arrangement are also discussed under the overarching goal of maximizing the operating reliability & efficiency of critical turbomachinery trains.
>>>>more
Short Course 2
 Who Should Attend
This course is designed for Operations & Process personnel, Instrumentation Technicians, and Maintenance Engineers. The program discusses the Operation, Maintenance and Basic configuration of CCC Series 3 Plus controllers as they relate to the control of centrifugal and axial compressors, as well as steam turbines. Although covering all of the same theory as the other course, it stresses "hands-on" experience with CCC Series 3 Plus controllers and CCC software tools, performance testing, surge testing practices, and advanced troubleshooting solutions. Configuration software will be covered in depth, including configuration, recorder, and downloading software. Every two to three course attendees will have their own Series 3 Plus controllers and laptop computer, complete with simulation, configuration and TrainView software.
>>>>more
Curso Corto 3
Quienes pueden atender
Este curso esta dirigido a ingenieros de proceso, ingenieros de maquinas rotativas, proyectistas, ingenieros de control, y supervisores de operaciones. El curso esta orientado a los niveles tecnicos de operacion, ingenieria, y especialistas vinculados con el diseño, operacion, y uso de equipos rotativos en procesos de produccion. El curso se dictara en idioma español.
>>>>more
For questions on CCC Technology Courses please contact (jellis@cccglobal.com) or CCC satellite office near you
Back to Global Offices page |
